Four DI + four DO with SPDT relays AC 277 V/10 A or DC 28 V/10 A
Y301-440 4DI+4DO Modbus I/O Module
4DI+4DO I/O Module
Digital Modbus RTU I/O node with four opto-isolated inputs and four SPDT relay outputs for multi-zone control in a compact 115 x 90 x 40 mm enclosure.
Key Features
DI offers wet/dry sensing, pulse counter, and configurable debounce
Supports eight linkage rules (follow, timer, pulse, interlock, schedule)
DC 5–36V input, DO retention, DIP + software Modbus addressing with watchdog
Specifications
Power Supply
- Voltage
- DC 5~36V
- Typical Current
- 180 mA @ 12V
- Max Current
- 250 mA (all relays on)
- Operating Temperature
- -40°C ~ +85°C
- Humidity
- 5% ~ 95% RH, non-condensing
Digital Inputs
- Channels
- 4
- Type
- Dry/wet contact, opto-isolated
- Voltage Range
- 5~36V (wet contact mode)
- Sampling Rate
- 100 Hz
- Pulse Counter
- 32-bit, selectable rising/falling edge
- Debounce
- 5~255 ms (default 50 ms)
Digital Outputs
- Channels
- 4
- Type
- SPDT relay
- Contact Rating
- 277 VAC 10 A / 28 VDC 10 A
- Minimum Load
- 10 VAC 10 mA
- Electrical Life
- 100k cycles at rated load
- Output Retention
- None / soft reboot / full retention
Communication
- Interfaces
- RS485 (2-wire), optional RS232 or TTL
- Protocol
- Modbus RTU slave
- Baud Rate
- 600~230400 bps (default 9600)
- Slave Address
- 1~255 (software) + DIP offset 0~31
Mechanical
- Dimensions
- 115 x 90 x 40 mm
- Mounting
- 35 mm DIN clip or screw slots
- Protection
- IP20
Talk to our technical team.
Tell us about your interfaces, network environment, and deployment requirements.